Volume 12, Number 4—April 2006
Research
Reducing Legionella Colonization of Water Systems with Monochloramine
Table 1
Measurement (unit)* | 2003, mean (range) | 2004,† mean (range) | Reference value‡ |
---|---|---|---|
Treated water | |||
Total chlorine, ppm | 0.60 (0.01–2.20) | 1.97 (0.15–3.40) | 4.00 |
Total trihalomethanes, ppb | 65.3 (16.0–143.0) | 34.8 (11.0–46.0) | 80.0 |
Total haloacetic acids, ppb | 19.5 (6.0–55.0) | 20.3 (3.0–33.0) | 60.0 |
Total organic carbon, ppb | 2.8 (2.4–3.3) | 2.9 (2.6–3.1) | NA |
pH | 9.0 (7.4–9.9) | 8.8 (7.5–10.5) | NA |
Lead, ppb§ | 6.7§ | 11.5 | 15.0 |
Copper, ppb§ | 120§ | 90 | 1,300 |
Water sampled from water heaters in 53 buildings¶ | |||
Total chlorine, ppm | 0.13 (0–0.86) | 1.10 (0–2.20) | NA |
Temperature, °C | 44.9 (17.8–87.8) | 45.1 (17.8–79.4) | NA |
pH | 8.9 (7.5–10.5) | 8.7 (7.5–10.4) | NA |
*ppm, parts per million; ppb, parts per billion.
†Measurements were taken from March through December 2004, after conversion to chloramine for residual disinfection.
‡Maximum allowable levels for compliance with Environmental Protection Agency standards. NA, not applicable.
§Measurements for lead and copper are the 90th percentile for samples collected from point of use. Prechloramine samples were collected during 2001.
¶Water heater samples were collected on 3 occasions over a 10-month period. Mean and range were calculated for 159 samples.
Page created: January 24, 2012
Page updated: January 24, 2012
Page reviewed: January 24, 2012
The conclusions, findings, and opinions expressed by authors contributing to this journal do not necessarily reflect the official position of the U.S. Department of Health and Human Services, the Public Health Service, the Centers for Disease Control and Prevention, or the authors' affiliated institutions. Use of trade names is for identification only and does not imply endorsement by any of the groups named above.